Material: Aluminum Alloy
Function: Construction Material
Surface Finish: Mill Finish, PVDF Coating
HS Code: 76169990
Performance: Lightweight and High Strength
Application: Decoration of Wall Cladding
Transport Package: Plywood Carton
Aluminum honeycomb panels are sandwich-structured composites with honeycomb cores. They are manufactured by using a variety of different materials, depending on the intended application and required characteristics, from paper or thermoplastics, used for low strength and stiffness for low load applications, to high strength and stiffness for high performance applications, from aluminum or fiber reinforced plastics. The strength of laminated or sandwich panels depends on the size of the panel, facing material used and the number or density of the honeycomb cells within it.
Specifications of aluminium honeycomb panels
Min Thickness: 2mm
Max Thickness: 500mm
Standard size: 1500x5800mm & 1250x2500mm
Max size: 1600x 12000mm &2000x3000mm
Test report: EN 13501-1, ASTM-E84
Features of aluminium honeycomb panels
One of the primary reasons for utilizing aluminum honeycomb panels is that they exhibit excellent strength-to-weight ratios compared to traditional construction materials.
The ability to configure panels with different materials allows us to create much stronger panels than one can achieve with solid structures. The skill, however, is in analyzing all of the material choices for meeting your specifications and then selecting those that will provide the most functionality at the lowest cost.
Huarui uses a number of materials that are non-combustible and self extinguishing. Most flammability ratings and building codes can be easily met with some combination of materials.
Most aluminum honeycomb panels have excellent insulation properties simply due to the nature in which they are designed. Since both honeycomb and foam cores trap air between the skins, they are inherently insulating to some degree.
While we do not specialize in acoustical panels, we are happy to incorporate any type of sound deadening specifications into the composite panels that we design.
Impact resistance can be accounted for by adjusting the honeycomb cell size, utilizing different core materials and skins, or adding thickness to the surface material and/or core.
All types of aluminum and plastic honeycomb cores can be used to improve water and moisture resistance, but RFP surface materials can also do the job for many applications.
Corrosion Resistance Not only can we utilize different core and surface materials to achieve resistance to weather and chemicals, but coatings can be applied for added security.
Aluminum honeycomb cladding/roofing/canopy/ceilling/ panels
Honeycomb is an aluminum composite panel comprising of a non-combusible aluminum honeycomb core sandwiched between two aluminum alloy skins. The front skin is always finished with Fluorocarbon(PVDF) coating applied through a continuous coil coating process complying with AAMA2604--98 and protected with a peel-off film to withstand six monthes weathering.The rea skin is finished with a polyester based wash coat.
|Aluminium Cover Sheet,front side[mm]||1.00||1.00||1.00||1.00||1.00|
|Aluminium Cover Sheet,reverse side[mm]||0.50||0.50||1.00||1.00||1.00|
|Section Modulus Z [cm3/m]||2.5||4.5||14.00||19.00||24.00|
|Rigidity E.l [kNcm2/m]||7'100||21'900||75'500||139'000||221'700|
|Aluminum Alloy skin||3003-16|
|Modulus of Elastlcity [N/mm2]||70'000|
|Tensile Strength of cover sheets [N/mm2]||Rm≥125|
|0.2% Proof Stress [N/mm2]||Rp02≥80|
|Temperature Resistance||-40oC to+90oC|
|Linear Thermal Expansion||2.4 mm/m at 100oC temperature difference|
|Front skin||Continuous Coil Coating-Fluorocarbon(PVDF)|
|Gloss( initia value)||25%-45%|
|Rear skin||Polyester based wsh coat|
|Sound Absorption Factor||α||0.05||0.05||0.05||0.05||0.05|
|Airborne Sound Insulation Index||Rw [dB]||21||21||22||23||25|